• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources

2 Speed Drilling auger drives

2 Speed High Flow 20-50T

Digga's 2 speed drilling auger drives for High flow machines have been designed for a wider range of applications. Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It's like having 2 drive units in 1.

Two speed drives suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders, and backhoes with flows between 40 and 200 lpm.

  • Improved motor design & performance with 2 Speed options:
    • Low speed (40 RPM) - High torque for large holes
    • High speed (60 RPM) - Low torque for smaller holes
  • Suitable for a wide range of ground conditions:
    • Soft loose soils, hard soils, and rocky conditions
  • Integrated PRV (Pressure Relief Valve)
  • Simple electrical connection:
    • 12 or 24 volt coil, just requiring connection
    • Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
  • Low maintenance with 5yr gear box and 3yr motor warranty

Features & Benefits

Digga drives come packed with really practical features like top mounted hose ports, cutting edge design, and a 2 piece shaft just to name a few. Hover your mouse over the features´ 'plus' symbol on the diagram below to reveal the respective benefits.

2 Speed High Flow Auger Drive Specifications

Specification pdt25 pdt30 pdt40 pdt50
Rec Flow Range 40-180 lpm 40-180 lpm 40-180 lpm 40-180 lpm
Nominal Torque 27373 Nm 31829 Nm 33733 Nm 39224 Nm
Motor Vis EATON Vis EATON Vis EATON Vis EATON
Pressure Valve Fitted Included Included Included Included
Energy Control Valve Optional Optional Optional Optional
Case Drain Required Yes Yes Yes Yes
Max Pressure -   -   -   -   -   Do not exceed 240 bar @ 150 lpm  -   -   -   -   -
Max Flow -   -   -   -   -   Do not exceed 180 lpm @ 200 bar -   -   -   -   -
Max Continuous Power -   -   -   -   -   Do not exceed 60 Kw (80 hp)   -   -   -   -   -   -
Overall Length 1217 mm 1217 mm 1217 mm 1217 mm
Diameter 355 mm 355 mm 355 mm 355 mm
Weight (no frame / hitch) 400 kg 400 kg 400 kg 400 kg
Std Output Shaft 100 mm Square 100 mm Square 100 mm Square 100 mm Square
Swing Control Optional Optional Optional Optional
Diggalign Optional Optional Optional Optional
Rec Auger 10 / 11 Series 10 / 11 Series 10 / 11 Series 10 / 11 Series
Max Auger Dia Clay / Shale 1200 mm 1200 mm 1500 mm 1500 mm
Max Auger Dia Earth 1600 mm 1800 mm 1800 mm 1800 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.