Home > Products > Auger Drives
Ultra Auger Drive

 

Digga Supa Drive

Digga Ultra Auger Drive

“Digga’s New Generation Ultra Drive range for the Serious Drilling Operator”

The Digga Ultra drive range is not for the faint hearted and is the ultimate in Ultra high torque performance up to 300,000Nm. Fitted with the world first I-Drive hydraulic motor system these units are able to utilize the total available horsepower of your machine to deliver maximum power to the application. Designed for maximum efficiency, easy fitment and reduction of operator error (i.e. no need for case drain) these units are bullet proof.

 

Features:

  • Heavy Duty Australian made Digga Planetary gearboxes
  • Extreme duty shaft locking system
  • Engineered hood & linkage design for maximum strength & durability
  • The most compact high powered drive on the market today.
  • Powered by the new DIGGA I-Drive Hydraulic System
  

I-Drive

Fully Australian Designed and Manufactured, the WORLD FIRST Digga 'I-Drives' are high capacity, compact, hydraulic drive systems fitted to Digga Hi Torque Planetary Gearboxes. Designed to fit 12 - 50 Tonne excavators for the installation of ground screw anchors, core barrelling and foundation drilling.

The cost effective I-Drive systems can fully utilize the total available horse power of the machine, accepting flows 150,250,375 500 lpm with single/dual or three speed options (high speed/low torque, mid speed/mid torque, low speed/high torque) and 1000 lpm in single speed only.

Features:

Click Here for Printable Version
150
LPM
250
LPM
375 LPM
500
LPM
1000 LPM
3 Speed
Single
2 Speed
Single
Single
2 Speed
3 Speed
Single
Drive Code
Std Torque

Torque (Nm)
Speed (RPM)

 

LO

 

MID

 

HI

 

LO

 

LO

 

HI

 

LO

 

LO

 

LO

 

HI

 

LO

 

MID

 

HI

 

LO
UD200 200,000
Nm
 201,067 150,800 100,534 - 201,657 100,534 201,067 201,067 190,050 95,025 190,050 142,537 95,025 207,000
   
RPM
 3 4 6 - 5 10 7 10 10 20 10 15 20 18
UD225 225,000
Nm
 227,484 170,613 113,742 - 227,484 113,742 227,484 227,484 232,805 116,402 232,805 174,603 116,402 232,900
   
RPM
 3 4 5 - 4 8 6 8 8 16 8 12 16 16
UD250 250,000
Nm
 256,963 190,472 126,982 - 253,963 126,982 253,963 253,963 261,913 130,957 261,913 196,435 130,957 262,000
   
RPM
 2 3 5 - 4 8 6 8 7 15 7 11 15 15
UD275 275,000
Nm
 285,701 214,275 142,850 - 285,701 142,850 285,701 285,701 278,064 139,032 278,064 208,548 139,032 278,100
   
RPM
 2 3 4 - 3 7 5 7 7 14 7 10 14 14
UD300 300,000
Nm
 317,438 238,079 158,719 - 317,438 158,719 317,438 317,438 310,427 155,214 310,427 232,820 155,214 310,500
   
RPM
 2 3 4 - 3 6 5 6 6 12 6 9 12 12
Chart shows all torques @ 240 bar. Speed Shown is rpm @ max torque.
For more detailed info please contact Digga.

Swoosh Valve - Screw Anchor Bypass Valve

A revolutionary flow reversal bypass valve called a "swoosh" valve is fitted to the manifold to control the rapid induced decompression of oil caused by the application of screw anchoring. (Optional extra fitted to the new "I-Drive" manifold system.)

Features:

Ryno Hitch

Specifically designed to handle the torsional loads of anchors and screw piling. The Ryno Hitch allows the operator to cradle the drive up to a 90 degree angle for easy connection to augers or anchors.

Diggalign

  

Features:

  • Extra heavy duty, fully engineered design
  • Premium Grade Steel
  • Highly efficient
  • Compact
  • The cradle stops the auger drive and anchors swinging around while maneuvering over uneven terrain.

Diggalign

DiggAlign Logo

Diggalign

  

 

  • Assists with the alignment of pendulum auger drives
  • Monitors forward/aft and side positioning
  • Easy read LED display Microchip inclometer
  • Can be fitted to all machine types