• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources

Drilling auger drives



Excavator Auger Drives
10T-20T

Digga's PD12 to PD25 range of drilling auger drives are ideally suited for 10 to 20t excavators with a flow between 120 to 230 lpm. Fitted with Digga/Danfoss bell motors with intergrated pressure relief valve and input housing. An innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drilling drives are specially designed for drilling and augering in most ground conditions.

  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with a DIGGA Bell Motor by Danfoss
  • No case drain required
  • Full range of shafts available upon request
  • Extreme duty shaft locking system
  • Drive fits down the hole for greater digging depth
  • Low maintenance with 5yr gear box and 3yr motor warranty

Features & Benefits

Digga drives come packed with really practical features like cutting edge design and a 2 piece shaft. Hover your mouse over the features´ 'plus' symbol on the diagram below to reveal the respective benefits.

specs see it in action

Premium Drive Specifications

Specification pd12 pd15 pd18 pd22 pd25
Rec Flow Range 120-230 lpm 120-230 lpm 120-230 lpm 120-230 lpm 120-230 lpm
Max Torque 11268 Nm 13897 Nm 17603 Nm 22142 Nm 26267 Nm
Motor 6K Geroler 6K Geroler 6K Geroler 6K Geroler 6K Geroler
Pressure Valve Fitted Included Included Included Included Included
Energy Control Valve Optional Optional Optional Optional Optional
Case Drain Required No No No No No
Max Pressure - Do not exceed -   -   -   -   -   -   -   -   -   -   240 bar @ 130 lpm  -   -   -   -   -   -   -   -   -   -
Max Flow - Do not exceed -   -   -   -   -   -   -   -   -   -   230 lpm @ 130 bar  -   -   -   -   -   -   -   -   -   -
Max Power - Do not exceed -   -   -   -   -   -   -   -   -   -   50 Kw (67 hp)   -   -   -   -   -   -   -   -   -   -   -
Overall Length 950 mm 1006 mm 1006 mm 1006 mm 1152 mm
Diameter 290 mm 290 mm 290 mm 290 mm 355 mm
Weight (no frame / hitch) 149 Kg 176 Kg 176 Kg 176 Kg 300 Kg
Std Output Shaft 75 mm
Square
75 mm
Square
75 mm
Square
75 mm
Square
100 mm
Square
Swing Control Optional Optional Optional Optional Optional
Diggalign Optional Optional Optional Optional Optional
Halo Optional Optional Optional Optional Optional
Rec Auger 8 Series 8 Series 8 Series 8 Series 10 / 11 Series
Max Auger Dia
Clay / Shale
1200 mm 1200 mm 1500 mm 1500 mm 1500 mm
Max Auger Dia Earth 1600 mm 1600 mm 1600 mm 1600 mm 1600 mm
(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.