Our single speed high powered auger drive range has been designed to handle higher machine hydraulic pressures and deliver more power at higher RPM, to suit drilling applications for 15-28 tonne excavators. Fitted with a high efficiency radial piston motor and integrated input housing, these drives will help you increase productivity and reduce downtime to optimise your returns.
Digga’s series of high-powered compact planetary drives form a comprehensive portfolio for the foundation boring, post hole drilling, screw piling and utility markets. Digga auger drives are manufactured right here in Australia, specifically for the diverse world-wide landscape.
The HP (High Power) range of drilling drives was developed for the professional driller – the standard Geroler hydraulic motor has been upgraded to a high efficiency, high power capacity radial piston motor, that delivers outstanding performance. Delivering 30% more speed and 80% more power when compared to a std drive of the same class.
Pair your drive to suit your machine type and achieve optimum performance, find out how to avoid costly repairs, and how the auger drive has technologically developed over the years.
The HP (High Power) range of drilling drives was developed for the professional driller - the standard Geroler hydraulic motor has been upgraded to a high efficiency, high power capacity radial piston motor, that delivers outstanding performance. Delivering 30% more speed and 80% more power when compared to a std drive of the same class.
By utilising the radial piston motor, the auger drive will accept 90kW of power, with a max pressure of 345bar (at 174lpm), delivering exceptional power-to-speed ratio when coupled with the industry leading Digga planetary gearbox.
The Digga gearbox utilises a two-piece shaft design, the shaft is a separate component to the planetary carrier, isolating the planetary gears from the pushing, pulling, and bending forces generated by the host machine.
More than double the side load capacity of any other gearbox on the market. Under torque load, the Digga two piece shaft design ensures there is no increased load on the bearings. The bearings do the job they were designed for, efficiently maintaining axial and side loading.
Digga drive units are made right here in Australia from quality materials. Digga is a proud Australian manufacturer committed to keeping jobs in the country.
|Max Torque @ 345 Bar||30, 250 Nm|
|Pressure Valve Fitted||Optional|
|Energy Control Valve||N / A|
|Case Drain Required||Yes|
|Max Pressure||Do not exceed 345 bar @ 174 lpm|
|Max Flow||Do not exceed 240 lpm @ 230 bar|
|Max Continuous Power||Do not exceed 90Kw/121hp|
|Overall Length||1221 mm|
|Weight (no linkage / hitch)||453 kg|
|Std Output Shaft||100 mm Square|
|Rec Auger||8 / 10 & 11 Series|
|Max Auger Dia Clay / Shale||1500 mm|
|Max Auger Dia Earth||1800 mm|