• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources
Mini loader anchor drives - Digga Australia
specs

Screw Anchor Drive for Skid Steer Loaders Up to 5T

The MM Series of anchor drives has been developed for domestic and small-scale commercial screw piling applications. Compact yet powerful, the gimbal mounted MM14K range suits machines up to 5.0 tonnes, ideal for tight-access and low-headroom environments.

the MM Series delivers reliable performance for foundation boring, screw piling, ground screw installation, and utility applications. A key feature of the MM14K drive is its unique gimbal mounting design, which provides increased reach, perfect for mini machines. The MM14K now includes the HALO alignment system as standard standard ensuring your screw anchars are installed at the perfect angle every time.

Despite its compact size, the MM14K screw anchor drive produces a nominal torque of up to ~14,000Nm, handling up to 25kW of continuous hydraulic power and operating at a maximum pressure of 205 bar.

Proudly manufactured in Australia, the MM14K drive is engineered for the global market. Available in Mini Extension, Excavator Mount, Mini Loader Mount, and Skid Steer Mount.

The MM14K Screw Anchor Drive is also available for other machine types: Mini Loader & Excavators up to 5T

What are anchor drives?

Find out what screw piles are used for, and what machines you need to install them. Learn the process of choosing the perfect screw anchor drive, and what info Digga uses to determine which drive is perfect for your job!

Compact & powerful

A lightweight compact high torque Digga manufactured gearbox will give you the comparable torque of a Digga PD15 drive unit, whilst maximising ease of movement in confined spaces when the boom is up, and provide more length for your screw piles.

Why use a gimbal mount?

A gimbal mount reduces the overall length of the drilling or screw anchoring setup, by eliminating the machine mount and linkage. This allows machines to work in areas with limited height, whilst allowing for longer augers or piers to be used.

HALO (Now Included)

HALO is an alignment system located in the hood of the auger, which when fully illuminated green, indicates the drive is plumb. If the drive moves from its plumb position, a sequence of red and green lights will guide the operator back to plumb. Learn More about HALO

An Industry leader

Utilising over 40 years of design and manufacturing experience, these anchor drives come fitted with a high efficiency Char-Lynn Bell hydraulic motor that can accept up to 25kW, with a maximum pressure of 205bar (at 70lpm), to deliver exceptional power.

Advanced design

The Digga gearbox utilises a two-piece shaft design, the shaft is a separate component to the planetary carrier, isolating the planetary gears from the pushing, pulling, and bending forces generated by the host machine.

Unmatched side load ratings

More than double the side load capacity of any gearbox on the market. Under torque load, the two piece shaft design ensures there is no increased bearing load, allowing the bearings to efficiently maintain axial and side loading.

Australian made quality

Digga drive units are made right here in Australia from quality materials. Digga is a proud Australian manufacturer committed to keeping jobs in the country.

Specification MM-14K - Skid Steers up to 5T
Max Torque @ 205 Bar 14,206 Nm
Motor Char-Lynn Bell
Pressure Valve Fitted N / A
Energy Control Valve N / A
Max Pressure Do not exceed 205 bar @ 70 lpm
Max Flow Do not exceed 70 lpm @ 205 bar
Max Continuous Power Do not exceed 25Kw (33hp)
Gearbox Length 640 mm
Gearbox Diameter 290 mm
Gearbox Weight 66kg
Std Output Shaft 75 mm Square
Hitch Width 350mm
Hitch Length 785mm
Hitch Weight 47.48kg
HALO Included