• By Machine Type
  • Core Attachments
  • Other Attachments
  • Monitoring Equipment
  • Mounting Options
  • Online Resources
Mini loader anchor drives - Digga Australia
specs

Screw Anchor Drives for Mini Excavators Up to 5T

The MM14K range of screw anchor drives is tailored for small-scale and domestic-use screw piling jobs. Compact yet powerful, it is suitable for mini excavators weighing up to 5 tonnes, making it ideal when working in tight spaces or areas with limited overhead clearance.

Designed to provide consistent power for foundation drilling, utility work, and ground screw installations, the MM14K range is equipped with a unique gimbal mount system. This design feature offers increased operational flexibility and reach.

Despite its compact footprint, the MM14K delivers up to 14,000 Nm of nominal torque. It can continuously handle hydraulic power up to 25 kW and withstands a maximum pressure of 205 bar. Now including the Digga LED light alignment system, you're assured of instalation precision at any angle.

Made in Australia from quality components, the MM14K screw anchor drive is available in different mounting styles including Mini Loader Mount & Skid Steer Loader Frame

What are anchor drives?

Find out what screw piles are used for, and what machines you need to install them. Learn the process of choosing the perfect screw anchor drive, and what info Digga uses to determine which drive is perfect for your job!

Compact & powerful

The lightweight, compact gearbox offers torque comparable to the Digga PD15 while maximizing maneuverability in confined spaces, especially when the boom is elevated.

Why use a gimbal mount?

The innovative gimbal mount reduces drilling or anchoring setup length by removing the machine mount and linkage, enabling machines to access lower height work zones while allowing longer pier or auger use.

HALO (Now Included)

The HALO alignment technology integrated in the auger's hood provides visual cues for plumb alignment. A full green light indicates perfect vertical positioning, while if the drive deviates, the system guides the operator back to the correct angle with a sequence of red and green lights. Learn More about HALO

An Industry leader

Drawing on more than four decades of Digga's engineering experience, these anchor drives feature a high-efficiency Char-Lynn Bell hydraulic motor capable of accepting 25 kW at 205 bar and 70 lpm, delivering strong continuous power.

Advanced design

A two-piece shaft design in the gearbox isolates the shaft from the planetary carrier to shield the planetary gears from bending, pushing, and pulling forces from the host machine.

Unmatched side load ratings

This design offers more than twice the side load tolerance of other gearboxes, allowing efficient bearing performance under torque loads.

Australian made quality

Manufactured in Australia with premium materials, Digga takes pride in supporting local manufacturing jobs.

Specification MM-14K - Excavators up to 5T
Max Torque @ 205 Bar 14,206 Nm
Motor Char-Lynn Bell
Pressure Valve Fitted N / A
Energy Control Valve N / A
Max Pressure Do not exceed 205 bar @ 70 lpm
Max Flow Do not exceed 70 lpm @ 205 bar
Max Continuous Power Do not exceed 25Kw (33hp)
Gearbox Length 640 mm
Gearbox Diameter 290 mm
Gearbox Weight 66kg
Std Output Shaft 75 mm Square
Hitch Weight 83kg
Hitch Length 664mm
Hitch Width 410mm
HALO Included